Share

ServoForm™ Mini

  • ServoForm™ Mini

    Baker Perkins’ ServoForm™ Mini depositor sits at the heart of a manually operated production line capable of producing deposited candies, jellies, toffees and lollipops – including high-value medicated or functional products – at piece weights ranging from 2g to 16g.

    The ServoForm™ Mini is a servo-driven, short run confectionery depositing system designed for entry-level operations or experimental and development work in larger operations. Based on Baker Perkins’ proven ServoForm™ depositing technology, the ServoForm™ Mini deposits a high quality, smooth product with a consistent size and shape, and high piece weight accuracy.

    Manual Operation

    Moulds are manually loaded onto a continuous indexing mould conveyor; the moulds then pass through the depositor and are manually unloaded for cooling and demoulding.

    The ServoForm™ Mini features an electrically heated hopper suitable for single colour products; a second hopper can also be incorporated for two colour or centre-filled products. PLC controls incorporating full process visualization, recipe management and alarm handling provide complete control of the depositing process.

    Production to Validation Standards

    The hygienic nature of the ServoForm™ Mini makes it ideal for production to validation standards for healthcare products. As well as being capable of validation, Baker Perkins’ starchless depositing technology brings high standards of quality, convenience and hygiene to healthcare confectionery production, eliminating the time and cost penalty of the traditional starch process. Low scrap rate, quick product changeovers and continuous processing mean a rapid payback is assured.

  • Features

    Features

    • Servo-driven depositing system
    • Continuous indexing mould conveyor
    • Electric heated hopper
    • Single hopper for one colour products
    • Optional second hopper for two colour or centre-filled products
    • Full PLC controls
    • Quick product changeover
    • 2g to 16g product weight

    Typical Jelly Sweet Outputs

     

    Jelly

    (Gelatine Based)

    Jelly

    (Pectin Based)
    Piece Weight 4.0 gram 4.0 gram
    Number Across 11 11
    Deposit Rows Single Single
    Mat Width 11.8” (300 mm) 11.8” (300 mm)
    Mat Length 15.0” (381 mm) 15.0” (381 mm)
    Mat Layout 11 x 12 11 x 12
    Depositing Speed 20.0 strokes/min 20.0 strokes/min
    Output: Pieces per minute 220.0 220.0
    Output: kg/hr 52.8 kg/hr 52.8 kg/hr
    Time to Fill Mat  36.0 secs 36.0 secs
    Mats per min 1.67 1.67
    Estimated Cooling Time 30 mins** (nominal) 10 mins** (nominal)
    Quantity of Mats/Moulds 65 (50+30%) 22 (17+30%)

    Outputs are subject to product formulation & test in the Baker Perkins Innovation Centre with clients' ingredients. Product quality is subject to raw materials used.

    ** Mat Cooling

    Cooling / setting time will vary by product type, piece size and mould type. Guidelines are between 5-6 minutes for hard candies in metal moulds, and between 10-20 minutes for caramels or pectin based jellies in silicon rubber moulds. Gelatine based jellies will require over 30 minutes before being manually ejected. The filled moulds can be laid out on a table, placed in racks or on a conveyor. Ideally the temperature and humidity in the cooling area should controllable to around 20°C for hard candies and 10°C for caramels and jellies, with RH below 60%.

eSheet: ServoForm™ Mini

eSheet: ServoForm™ Mini

eSheet: Confectionery Laboratory Equipment & Innovation Centre

eSheet: Confectionery Laboratory Equipment & Innovation Centre

Brochure: Confectionery

Brochure: Confectionery

Complete Confectionery Process Lines

Complete Confectionery Process Lines

Cooking and depositing systems for hard candy, lollipops, fondant & fudges, toffees & caramels, jellies & gums, healthcare confectionery and Xylitol confectionery.

Confectionery Innovation Centre

Confectionery Innovation Centre

Baker Perkins offers all its customers facilities to develop new products and processes, produce samples for test marketing, and conduct feasibility trials.

Lifetime Support for Confectionery Equipment

Lifetime Support for Confectionery Equipment

Parts, service, upgrades and rebuilds for your Baker Perkins machines for as long as they remain in production.