Share

Batch Dissolver

  • Batch Dissolvers

    The Batch Dissolver is used to dissolve batches of either pre-weighed individual ingredients or a pre-weighed confectionery syrup slurry batch from the weighing system.

    The Dissolver comprises a cylindrical tank with a steam coil in its base and a centrifugal pump. Batch sizes up to 200 kg can be handled.

    The centrifugal pump circulates the syrup within the Dissolver until a pre-set temperature has been reached. The pump then stops and the steam supply is cut off. The dissolved syrup is then discharged by operation of a diversion valve, and restarting the pump. The dissolved syrup would normally be transferred into a holding vessel for further processing.

    Outputs up to 700 kg per hour can be achieved with hand feeding and 1,350 kg per hour with automatic ingredient feed.

  • Options

    The Batch Dissolver is used to dissolve batches of either pre-weighed individual ingredients or a pre-weighed confectionery syrup slurry batch from the weighing system.

    Coil Dissolver

    A range of coil type Dissolvers is available for continuously dissolving a syrup slurry previously homogeneously mixed. The unit comprises a syrup slurry metering pump and an insulated steam heated chamber with an internal cooking coil. The pump and chamber are mounted on a stand and are manufactured to accepted pressure vessel regulations and come complete with steam controls.

    The unit comes in four sizes with outputs up to 1,750 kg per hour of a dissolved syrup.

    Plate Heat Exchanger Dissolver

    A range of plate heat exchangers is available for the continuous dissolving of many confectionery syrups with outputs from 200 to 2,000 kg per hour. Hygienic operation with all surfaces accessible for cleaning. The unit would be fed with a continuous supply of a homogeneously pre-mixed syrup slurry via a suitable metering pump. The number and size of plates used determines the output.

    The plate pack is mounted within an enclosed frame. All materials used that come into contact with the product are stainless steel. Steam controls and control panel housing electrics form part of the specification.

    Scraped Surface Dissolver

    This unit is specifically designed for dissolving confectionery syrups that may contain ingredients which may burn onto heated surfaces as is the case for toffees and caramels which contain milk and dairy fat. To overcome this problem the heated surface is continuously scraped which minimizes burn on and improves heat exchange efficiency.

    The Dissolver comprises a vertically mounted steam jacketed heated tube suitably insulated and stainless steel covered. Product enters at the bottom of the tube and exits from the top. A number of these units can be mounted in series to increase output and would form part of a total toffee/caramel dissolving and cooking plant.

    The scraper has a fixed speed drive and steam controls form part of the total package. The Dissolver would be fed with a continuous supply of a syrup slurry from a holding vessel via a positive displacement metering pump. All product contact materials are in stainless steel. The vertical tube is manufactured to accepted pressure vessel regulations.

  • Full Equipment Range
    Weighing & Mixing  

     

     

     

     

    Autofeed

    Batch Dissolver

    AutoCook™ Systems  

     

     

     

     

     

     

    AutoCook™ Systems: Overview

    Microfilm™ Cooker

    Turbofilm™ Cooker

    Fondant & Fondant Crème

    Carablend™ Toffee Cooker

    Colour / Flavour Incorporator

    Depositing  

     

     

     

    Hard Candy

    Lollipop

    Soft Confectionery

    Jellies & Gums

    Multi-Product

    Compact Depositors

    Experimental Depositors

Brochure: Confectionery

Brochure: Confectionery

Complete Confectionery Process Lines

Complete Confectionery Process Lines

Cooking and depositing systems for hard candy, lollipops, fondant & fudges, toffees & caramels, jellies & gums, healthcare confectionery and Xylitol confectionery.

Lifetime Support for Confectionery Equipment

Lifetime Support for Confectionery Equipment

Parts, service, upgrades and rebuilds for your Baker Perkins machines for as long as they remain in production.